Help With Dual Boot Vista/xp And Raid 0
From Daemon Tools, mount the Vista DVD image and proceed to installation. I guess the problem was caused from the boot partition not being on the same parition as the initial XP install but am not sure. This is the second time I have tried to install Vista, the first was Vista x86 bit. Ensure you have the Vista DVD image emulated or in the DVD drive. this contact form
You can use the BCDEdit tool to see what is the boot configuration by Vista. The problem is that I want to format the I: drive to get rid of VISTA all together and not loose any other information from any other drive. Vista loaded and showed my partitioned Raid 0 array but no operating system is shown. Hal.dll is still missing.
What should I do? If all goes well, ill be running vista in no time! (infortunately by the time i heard about RC2 microsoft had already closed the download, 🙁 but no big deal i Reply Simon Kurash says: September 19, 2006 at 8:25 am I'm a stupid person and I didn't choose a different directory for Windows Vista RC1, I upgraded the version as it
- Since then I can't boot into XP anymore since it can't locate the hal32.dll.
- The question to my main problem is located on the last sentance of the last paragraph.
- Could I just format the new 250g which has vista from the start up menu on my board?
- Dual boot Windows 7 & XP on Raid 0 - No floppy drive Discussion in 'General Software' started by NdMk2o1o, Jul 3, 2010.
- Any help to make this without losing any data?
- When the computer rebooted, Vista began to uninstall itself.
- Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build.
- Recently, I formatted my C:, and now my Vista stopped working.
My XP works fine. I do, however, like Vista for everything else (mostly Office apps and internet, so the Aero interface is very convenient).So I guess the only opinion that I couldn't find to by any help would be greatly appreciated! please help Thanks Arun Reply Donna Newsome says: July 6, 2006 at 4:26 pm hi i can't defragg my PC defragmenter tells me degragmeneter disk engine is lost.
It then asks me to hit alt-ctrl-delete to restart comp. Then installed windows 7 on the partition. Probably until I get my hands on one. Several functions may not work.
Sim Site Rankings The AVSIM Staff Flight Simulation's Premier Resource! AVSIM is a free service to the flight simulation community. Installation & Setup no boot after enabling BIOS RAID0I just bought a refurb Dell XPS 420 w/ Q9300, running Vista Home Premium x64 and downloaded/installed an activated version of Win 7 I mounted vista_5728.16387.060917-1430_x86fre_client-lrmcfre_en_dvd.iso to my virtual F: drive using D-tools. All rights reserved.Make Tech Easier is a member of the Uqnic Network.
But otherwise, you should just use the "fixmbr" method in the XP install CD through the repair environment. I assume I can just go into the BIOS and disable the nForce RAID controller. any solutions will be very appreciated ! I am going to install a second hard drive, but am not sure how to get Vista to recognize the second drive for an installation.
The second HDD is SATA with 1st partition primary and active and size 40 GB, and other 2 logical partition. weblink at boot up i choose ‘earlier version of windows' but the screen blacks out and nothing happens. Reply Long Zheng says: November 23, 2006 at 4:03 pm @djlasky: Step 3. In fact, I am able to save other files in that particular partition.
I have vista pre-installed on my system and I don't want to wipe out everything to install windows 7 beta, you know just to test it out. the boot selection menu still was there . Thanks in advance. navigate here I tried reinstalling ntoskrnl from the original file, but that did not work either.
Now, I have installed Vista RC2 on this laptop before in a single OS configuration and it does work. Reply Long Zheng says: October 9, 2006 at 12:50 pm @Rey Flores: You can try one of three things, ranked from easiest to hardest. According to VBP Windows tried to boot from F:, but boot.ini, ntldr and ntdetect.com are on T:.
I've made sure CD is first boot device in bios, and has always worked (this is how I installed vista)… now, I get the prompt to boot from CD (press any
After the installation, you should see the black screen for you to select "Older version of windows" or "Windows 7" in the bootup screen. Make sure the XP CD is SP2 (or whichever service pack you're running), otherwise it may cause problems. In some cases, the existing drive letter could conflict with the CD-rom drive letter and that's why you can't see the partition when you boot up XP installer CD.Hope this helpsDamien Im currently formatting my hard drive.
After a few attempts due to sata driver issues I finally got a smooth clean install of XP on a single HD. BSOD Help and Support Our Sites Site Links About Us Find Us Vista Forums Eight Forums Ten Forums Help Me Bake Network Status Contact Us Legal Privacy and cookies Windows 7 I really don't want to have to have a dvd in my computer everytime I want to turn it on. http://exomatik.net/help-with/help-with-vista-i-m-sure-i-m-still-infected.php Now in case you didn't know, Windows XP (older version) does not recognize SATA drives.
Set the hard disk or RAID set with the boot manager as the second 2nd boot item. After a few attempts due to sata driver issues I finally got a smooth clean install of XP on a single HD. I have however discovered that if I leave the dvd with the RC1 ISO in my disc drive it manages to make it to the boot manager screen and it's all For virtual drive emulation, I recommend Daemon Tools.
He said that if I install Windows XP in one of those new volume partitions that OS is not going to work, and if it does maybe I will lost my I have the Knack. ** If I haven't replied in 48 hours, please send me a message. I ran the custom install of Vista from within XP and after it rebooted I was never presented with a Bootloader screen to choose which OS to load. I have decided to rather wait until Vista is more stable and tried to uninstall Vista but with no luck.
Reply Matt S. Then get rid of the entry for the T: XP in boot.ini (do this from the current XP just to be safe), delete the Windows folders from T: (but leave the Jul 3, 2010 at 10:20 PM #11 NdMk2o1o Joined: Apr 21, 2010 Messages: 4,256 (1.72/day) Thanks Received: 1,621 Location: Redditch, Worcestershire, England System Specs System Name: Hi5-3570k Processor: i5 3570k - Works for me but applying full-access permissions takes a while on all those files.
FYI My current boot.ini on my C: drive looks like this: ; ;Warning: Boot.ini is used on Windows XP and earlier operating systems. ;Warning: Use BCDEDIT.exe to modify Windows Vista boot WinXP installed on the partition C: and now I install Win 7 in partition D:. If not, then just use the "fixmbr" command with your X64 CD. http://www.litepc.com/xplite.html Last edited: Jul 3, 2010 Jul 3, 2010 at 7:15 PM #3 Loosenut Joined: Jan 14, 2010 Messages: 924 (0.36/day) Thanks Received: 221 Location: Granby, Qc.
Remove two files (Boot.BAK & Bootsect.BAK) on your XP drive's root folder (C:), these were backup files of your previous bootloader, now no longer useful. My questions are the following one where to delete the old reference of Vista on the boot menu. Reply OkComp says: October 24, 2006 at 1:13 pm Hi, I tried to upgrade the OS and at the last step of the installation I got a message saying that it