Home > Hard Drive > Help With XP Install - Re-adding A New Internal Hard Drive.

Help With XP Install - Re-adding A New Internal Hard Drive.


Just use GParted like most Linux users this century. Just the right amount of geekiness in my opinion for what it's worth! Using the old drive to boot and connecting the new one as a slave, I see all of the files created by the restore disk. That's another option. http://exomatik.net/hard-drive/how-to-select-second-internal-hard-drive-for-backup.php

How would they know whether they have an IDE or SATA hard drive if they have never even heard of those abbreviations before? Copyright 1990-2003 Dell Computer Corp. Does anyone know if this is correct? Image Credits: Transplant by Grant Hutchinson, available under Creative Commons.

How To Format A New Hard Drive

solved I installed windows 8 on a 3TB HDD but it only registers as a 2TB hard drive my 3tb hard drive is showing can not be read by the system. Reply Donna says: September 30, 2008 at 1:08 pm Hi, Just read your article and i'm sure i've done all the physical installation correctly of my second/slave IDE. We also recommend unchecking Enable file and folder compression because it can negatively impact your day-to-day drive performance.

Dell do not ship any disk with their computers any longer. Then, after paying $70 bucks he restored it (with all files gone) he told me I had a virus and not to download free music anymore and always update my security Gaming mouse See more forum posts Research by Category Desktops Laptops Tablets & E-Readers Printers PC Components Research By Brand Samsung Apple Dell Hewlett-Packard Lenovo Connect With Us Contact Info Meet How To Install A New Hard Drive On A Laptop Sometimes, you may need to tip the case or get into some strange positions to reach all the screws; other times, the hard drive is mounted in a cage that you'll

Choose Delete Volume if you’d like to make more than one partition on the drive – for example, one for music and one for movies. Install New Hard Drive Windows 10 Reply David D says: June 3, 2008 at 12:56 pm I'm planning a hard drive replacement. If not, your drive is corrupted and cannot be repaired. Check out our guide to partitioning drives in Windows How To Shrink & Extend Volumes Or Partitions in Windows 7 How To Shrink & Extend Volumes Or Partitions in Windows 7

Did I get a bad drive or is there something that I need to do to get the new drive to be recognized as the boot drive? What To Do After Installing A New Hard Drive Related Posts:What to consider when buying a new hard driveThree ways to keep your hard drive healthy and prolong its…LaCie 4TB Porsche Design USB 3.0 External Hard Drive ReviewWhat to keep Choose Format if you’d simply like to make it into a fresh NTFS partition instead of FAT32. Reply Mackenzie February 14, 2009 at 7:29 pm It's only more involved in Linux because you are making it that way.

Install New Hard Drive Windows 10

Tip: Using a SATA PCI interface card? Reply damnvista says: January 8, 2010 at 10:50 pm well you say vista cant read the drive from ‘my computer' but you dont say how to start a format process… do How To Format A New Hard Drive At this point, you may want to make some quick sketches of just how everything is in there: Which direction is everything facing? How To Install A Second Hard Drive Install this software first.

I'm familiar with computers but this is the first dual setup I have seen. check over here Image Credit : TigerDirectTV Previous PostHow to Physically Install a Second Internal Hard DriveNext PostHow to Install a Second IDE Hard Drive on Older PC's 18 comments Write a Comment Tammy Reply bill taylor says: September 8, 2008 at 5:01 pm thanks for the help! If you are simply installing a secondary drive, boot into Windows. How To Install A New Hard Drive Windows 7

Pro Tip: New, unformatted drives will appear as RAW under the File System column whereas prepared drives will be either FAT32 or NTFS. I pulled old IDE drive out of old box. I installed just as you said. his comment is here My problem is that it thinks the "C" drive is the main drive & when I try to update my windows or drivers, it is not giving me the option to

It had been about 20 years since I have messed with the innards of of a computer. New Hard Drive Not Showing Up I do the long procedure and that is installing the new one and installing all the software from scratch. I have a Windows XP system.

Reply sr.robato_pcola_fl says: March 18, 2009 at 5:11 pm nice article!

To format, right-click on the drive and select Format. I don't know if it will work with installing just one. there is power gettingto the drive and the conections are secure. How To Install A Hard Drive In A Laptop How to Use All of Windows 10’s Backup and Recovery Tools How To Be Your Own Personal Clone Army (With a Little Photoshop) How To Hide Passwords in an Encrypted Drive

http://support.microsoft.com/kb/309000 Please register on our forums and post a thread here for more specialized help. This is an extremely... Identifying The Proper Replacement Before you can upgrade a hard drive with a new replacement you’ll need to determine the type of drive you need to buy. weblink Even for a non-too compuer literate such as myself!

You can easily tell the difference between the two because an IDE connection uses numerous pins, while SATA uses a pin-less L-shaped connector. Because label C has been used for removable drive slot on my printer (my printer has USB slot for UFD, HP Photosmart D5160). If so, screw a set onto the new drive (look inside the case for spares), then slide the drive into its bay. Privacy Policy Terms of Use PCMag Digital Group Accessibility Statement privacy policy | © Copyright 2017 Ziff Davis, LLC.

Don't know if it's important, but i'm running XP. Reply vince says: March 26, 2013 at 2:21 pm for one if the NEWB reads this it will perk his interest. It still has 2.79 GB of space used. The metal the case is built from is thicker than average so the screws I have do not reach to try and install it that way.

Registration is free and the forums are specifically for tech issues such as yours. Wanted to install in new box. but the device is working properly according to the device manager and computer management. Therefore, the people who don't know DO need a guide, but this guide is USELESS to them because THEY WON'T UNDERSTAND IT.

But thankyou for the time you put into posting this info.. Reply Bomberboy92 says: August 25, 2007 at 11:25 pm Wow thanks this tutorial really helped me with my new drive.